Adrianna
- Total activity 111
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 56
Activity overview
Latest activity by Adrianna-
Adrianna created an article,
MANUAL IN ENGLISH
You can see the Manual for your Paralenz Vaquita here. Other languages will be added with time. If you have any questions, make sure to let us know on support@paralenz.com
-
Adrianna created an article,
UPDATING FIRMWARE ON YOUR PARALENZ VAQUITA
You can always find the most recent firmware on this page under "Vaquita Firmware" 1) Make sure that your camera has at least 30% of charge - otherwise, connect it to charging The SD card should...
-
Adrianna created an article,
IMPORTING FOOTAGE TO YOUR APP
For all Paralenz cameras we recommend removing the end cap and connecting the camera to charging while using the app. It is also good to keep the camera close to your phone device. IMPORTING FOOT...
-
Adrianna created an article,
CONNECTING TO THE APP
For all Paralenz cameras we recommend removing the end cap and connecting the camera to charging while using the app. It is also good to keep the camera close to your phone device. CONNECTING YOU...
-
Adrianna created an article,
EIS (ELECTRONIC IMAGE STABILIZATION)
It is currently under development and is planned to be available in week 49 or 50. We are very sorry for the delays on this one. Once available, the EIS will work with all resolutions excluding...
-
Adrianna created an article,
DCC™ (Depth Color Correction) IN PARALENZ VAQUITA
If you have used Paralenz cameras before, you might be familiar with Blue and Green DCC. It is no longer the case in Paralenz Vaquita - instead, we worked on DCC Auto. That means that you no long...
-
Adrianna created an article,
SETTING TIME AND DATE
When receiving the camera, the time and date might be incorrect. It can be corrected by using the GPS function in the camera. What you can do is to place your Paralenz Vaquita in a window (turned...
-
Adrianna created an article,
CHARGING VAQUITA
You can charge Paralenz Vaquita with the included USB-C cable. Please note that the screen will not display charging. It is done in order to ensure faster charging (approx. 1,5-2 hours to full bat...
-
Adrianna created an article,
TURNING VAQUITA ON AND OFF
To power on, place the selector ring in the Power mode and hold the activation switch for 4 seconds, then release it. When the switch has been released, the camera will vibrate and the display will...
-
Adrianna created an article,
CHARGING PARALENZ+
You can charge the camera with the included USB-C cable. Just leave the camera off and plug-in the charger. The screen will show "charging". The charging should take approx. 3-4 hours (from compl...