Avatar

Paul Budd

  • Total activity 12
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 0
  • Subscriptions 2

Activity overview

Latest activity by Paul Budd
  • Avatar

    Paul Budd commented,

    Just thought that I would let folks know, that even though the manual says that the camera/app will not stream 4k video from the camera, it does. This could be because I am using a phone with a 4k ...

  • Avatar

    Paul Budd commented,

    Hi, have just completed some more dives, with the camera set to 2.7k, at 60fps, video mode only, using firmware release 1.3.2. I have filmed at depths ranging from 8m to 34m. The results have been ...

  • Avatar

    Paul Budd commented,

    Have just tested 1.3.2 in blue water at both 10m and 22m. The camera performed really well. No freezing or failed recordings. The colors are really, really good. If I was to be really critical, the...

  • Avatar

    Paul Budd commented,

    Hi Maja, Are you using an android or i-phone? If android, have you updated to the caemra firmware (1.3.2) and latest app version 1.67? My camera has this firmware with an android phone and it appea...

  • Avatar

    Paul Budd commented,

    Windstrings, Just read your latest comments. Sorry to hear about your vid & pics. While I have tested 1.2.9 thoroughly yet, (fingers' crossed) - I'll be doing that in about 6 weeks' time, it does s...

  • Avatar

    Paul Budd commented,

    Thanks for the update. I think that I will hold off installing 1.3.0 until the next release. Note to Paralenz; it would be really helpful if you could tell us what each release provides in terms of...

  • Avatar

    Paul Budd commented,

    Mohit, I had exactly the same proble. The camera indictaed that it was saving the vid & pics, when in fact it actually was not. I too was also using version 1.2.6. I fear that you may have lost you...

  • Avatar

    Paul Budd commented,

    Hi Roland, I have experienced problems installing the frimware in the past and Paralenz sent me the following. The standard method didn't work initially and so I tried the process after step 5. I h...

  • Avatar

    Paul Budd commented,

    Try this link, Roland. https://legacy.paralenz.com/firmware/ I have managed to download 1.2.9 & now keep as a spare copy (just in case I need to reload the formware).

  • Avatar

    Paul Budd commented,

    I am afraid that the link still does not work for me (V1.3). I am using a windows 10 pc with Firefox browser. I hoping that you'll fix the link after the holidays. Thanks