For all Paralenz cameras, we recommend removing the end cap and keeping the camera close to your phone device.
CONNECTING YOUR PARALENZ VAQUITA TO THE APP:
1) Turn your camera on - once booted, move the selector ring to the Settings icon
2) Hold the activation switch until the Wi-Fi has been activated (the screen will show "connect on device" until disabled again).
3) Open the Wi-Fi settings on your phone, and choose to connect to the Paralenz Vaquita Wifi (password: 1234567890)
4) Open the Paralenz App, click the camera icon at the top - choose Vaquita and click "connect"
5) When done using the app, click the "Disconnect" button
CONNECTING YOUR PARALENZ+ (OR THE 1ST GENERATION) TO THE APP:
1) Turn your camera on - once booted, move the selector ring to the Settings icon.
You can connect your camera to charging for a better connection
2) Hold the activation switch until the Wi-Fi has been activated
3) Open the Wi-Fi settings on your phone, and choose to connect to the Paralenz_XXXX Wifi (password: 1234567890)
4) Open the Paralenz App, click the camera icon at the top - choose Paralenz+ and click "connect". The camera will now display "Connected"
5) When done using the app, click the "Disconnect" button - the "Connected" message should disappear from the camera's display
Add comment
Article is closed for comments.