Connecting to the app Connecting to the app

Connecting to the app

Adrianna Adrianna

For all Paralenz cameras, we recommend removing the end cap and keeping the camera close to your phone device.

 

CONNECTING YOUR PARALENZ VAQUITA TO THE APP: 

1) Turn your camera on - once booted, move the selector ring to the Settings icon

2) Hold the activation switch until the Wi-Fi has been activated (the screen will show "connect on device" until disabled again).

3) Open the Wi-Fi settings on your phone, and choose to connect to the Paralenz Vaquita Wifi (password: 1234567890)

4) Open the Paralenz App, click the camera icon at the top - choose Vaquita and click "connect"

5) When done using the app, click the "Disconnect" button

 

CONNECTING YOUR PARALENZ+ (OR THE 1ST GENERATION) TO THE APP:

1) Turn your camera on - once booted, move the selector ring to the Settings icon. 

You can connect your camera to charging for a better connection

2) Hold the activation switch until the Wi-Fi has been activated 

3) Open the Wi-Fi settings on your phone, and choose to connect to the Paralenz_XXXX Wifi (password: 1234567890)

4) Open the Paralenz App, click the camera icon at the top - choose Paralenz+ and click "connect". The camera will now display "Connected"

5) When done using the app, click the "Disconnect" button - the "Connected" message should disappear from the camera's display

Was this article helpful?

13 out of 38 found this helpful

Add comment

Article is closed for comments.