Inserting/removing SD card from Paralenz+ Inserting/removing SD card from Paralenz+
  1. Paralenz
  2. Paralenz Dive +
  3. INSTRUCTIONS

Inserting/removing SD card from Paralenz+

Adrianna Adrianna

Insert

Turn off the camera before inserting the SD card. Use only class U3 or V30 SanDisk SD cards. A capacity of 32 GB or more is recommended. (Max. 128 GB)

  1. Unscrew the end cap. 
  2. Insert the microSD card (NOT included).
  3. Screw the end cap on - make sure the selector ring can rotate freely.

Remove

Turn the camera off before removing the card.

  1. Unscrew the end cap.
  2. Push the SD-card in, in order to release it and pull out the card.
  3. Screw the end cap on - make sure the selector ring can rotate freely.

Was this article helpful?

0 out of 0 found this helpful

Add comment

Article is closed for comments.