Turning Paralenz+ on and off Turning Paralenz+ on and off

Turning Paralenz+ on and off

Adrianna Adrianna

To power on, place the selector ring in the Power mode and hold the activation switch for 4 seconds. The camera will vibrate and the display will show the Paralenz logo.

The camera will be ready to use, once the logo disappears and you can see the Home screen. You can then turn the selector ring and operate the camera. 

To power off, place the selector ring in the Power mode again and hold the activation switch for 4 seconds. The camera will vibrate again and the display will show “Goodbye”. 

Was this article helpful?

1 out of 2 found this helpful

Add comment

Article is closed for comments.