The auto record function will allow you to start recording (hands free!) at a designated depth.
It is a very useful feature, especially when you do not need to add another task on your focus list.
In order to turn the function on, you should go to Settings > Auto Rec. where you will have a choice between 0.3/0.9/1.5 meters (1/3/5 ft.). Hold the activation switch to choose the desired depth.
Now, off to the next step! Once you are ready to jump into the water - turn the camera on, turn the selector ring to Video mode, and simply jump in! The moment you reach the chosen depth, the camera will start recording.
The video will stop, when you hit the chosen depth again.
Note: The auto record function will start the video automatically only once! If you go down and up, and then down again - the camera will only record the first submerge moment.
If you have any questions - make sure to let us know on firstname.lastname@example.org