The 3rd Person Viewer consists of the following:
1 x Extendable Carbon Pole
2 x Floats
1 x Lanyard with magnets
To assemble the 3rd person viewer follow these steps:
1. Attach the key ring to the bottom of the extendable carbon pole.
2. Click on the floats to either side of the camera with the widest part pointing forward.
- Make sure the both connectors on each float is firmly attached to the camera and the float itself is aligned.
3. Click on the the extendable carbon pole to the bottom of the camera.
The angle of the 3rd person viewer can be adjusted at the joint between the pole and the camera, by pulling the two taps towards the camera.